Meech HYPERION 233v4 - Introduction to the 233 v4 Pulsed DC Controller

3
Introducon
The Hyperion 233v4 Pulsed DC Controller is a compact and powerful 15kV
controller. It was principally designed to directly power two Meech pulsed DC
ionisers. If more ionisers are required, they can be connected via spliers.
The versality and exibility of the 233v4 make it suitable to use in a wide
range of industries. Installaon and set up of the controller are easily
achieved.
The 233v4 features all the adjustability and monitoring that you would
expect from a Hyperion product. Fully BarMaster and SmartControl Touch
compable, the output voltage, frequency and balance can all be adjusted
to suit parcularly dicult applicaons. The adjustable output voltage
is parcularly useful in very sensive applicaons such as those found in
cleanroom environments.
The Hyperion BarMaster remote programmer and SmartControl Touch are
available for purchase from the Meech network: Visit www.meech.com to
nd your nearest Meech oce or distributor for further product informaon.