Meech HYPERION 233v4 User Manual

7
Remote Signal
In the case of the Clean Pin Alert signal, the Cleaning Alert LED will acvate.
This can be monitored remotely to alert the operator to aend to the
controller.
Sealed Construcon
IP67 construcon allows the controller to be mounted in areas subject to
wash-down or spillage.
WARNING
This equipment must be grounded /earthed via the mains cable. Failure
to do so can result in damage to the unit.

Meech HYPERION 233v4 Specifications

General

Brand	Meech
Model	HYPERION 233v4
Category	Controller
Language	English