MAC/MTT-OPS-1
26 FEB 2019
SECTION 5
Performance
5-2
TYPICAL SPRAY DURATION AND FLOW
Duration
Flow Rates
Estimated spray duration for various capacity tanks with four different spray head configurations. Spray duration
in minutes is shown on the vertical axis. The ‘fine’ setting is 1/4 inches in height, and the ‘heavy’ setting is 3/8 inches in
height.
Total flow rates of different spray head configurations. The approximate total flow rates in gallons/minute (left
vertical axis) and liters/minute (right vertical axis) of four possible spray head configurations. The ‘fine’ setting is 1/4
inches in height, and the ‘heavy’ setting is 3/8 inches in height.
To Next Page
Loading...