MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-10
MAC/MTT-OPS(CL)-1
26 FEB 2019
7. Cab Control SYSTEM/POWER Switch – OFF
Water Cannon
1. Cab Control SYSTEM/POWER Switch – ON
2. PUMP Switch ON
Do not engage/disengage the water pump
above LOW IDLE. Engaging/disengaging the
water pump above low idle will result in water
pump component damage and reduced service
life.
3. (Multi Water Cannon) Select desired water
cannon to control. Only one water cannon can be
controlled at any given time.
a. AUX 1 – ON to control the bumper/deck water
cannon.
b. AUX 2 – ON to control the right rear water
cannon.
The joystick controls will be inactive for 4
seconds while switching between controlling
different water cannons.
4. Water Cannon – Pointed in a safe direction.
N-9