MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-11
MAC/MTT-OPS(CL)-1
26 FEB 2019
5. MONITOR/BFV Switch – ON
6. Water Cannon Joystick – As Required.
7. MONITOR/BFV Switch – OFF
Once operations are complete:
8. Water Cannon Nozzle - STOW
Manual and remote adjustable nozzles must be
stowed pointing vertically to reduce wear on
water cannon joints. Leaving the nozzle in any
other position will cause increased wear on water
cannon joints and result in premature joint
failure.
9. PUMP Switch OFF
Do not engage/disengage the water pump
above LOW IDLE. Engaging/disengaging the
water pump above low idle will result in water
pump component damage and reduced service
life.
10. Cab Control SYSTEM/POWER Switch – OFF
N-10
To Next Page
Loading...