MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-18
MAC/MTT-OPS(CL)-1
26 FEB 2019
6. DRAIN Switch – OFF.
7. PUMP Switch – OFF
8. SYSTEM/POWER Switch – OFF
Suction Load Station
1. Place vehicle near water holding pond.
2. Secure vehicle and make unit safe for exiting cab.
3. Foot Valve – Serviceable
4. Suction Hoses – Inspect suction hoses for
serviceability. Ensure suction hoses are
connected properly to each other and the
suction load inlet to prevent air leaks while in
use.
5. Suction Hoses – Immerse in pond or water
supply.
6. Position all butterfly valves as indicated in the
following pictures and in the order as follows:
a. SUMP VALVE - CLOSED
b. SUCTION VALVE - OPEN
c. SPRAY BAR VALVE - CLOSED
d. TANK FILL VALVE - OPEN
N-17
To Next Page
Loading...