MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-15
MAC/MTT-OPS(CL)-1
26 FEB 2019
4. Water Level – Drain to desired level.
Do not operate the water pump in a dry sump.
Dry running operation will cause water pump
failure.
Once operations are complete:
5. DRAIN Switch – OFF
6. PUMP Switch OFF
Do not engage/disengage the water pump
above LOW IDLE. Engaging/disengaging the
water pump above low idle will result in water
pump component damage and reduced service
life.
7. Cab Control SYSTEM/POWER Switch – OFF
Hose Reel
1. Hose Nozzle – CLOSED
2. Hose – Deploy desired length.
N-14
To Next Page
Loading...