MAC/MTT-OPS-1
26 FEB 2019
SECTION 6
Employment
6-10
6. Head to the site and perform operational
check of the fire suppression system.
7. Activate the water pump.
8. Approach the site from a safe direction based
on observed winds and know hazards.
9. Activate the fire suppression system as
contained in Section 2 “Normal Operations”.
10. Lay down an initial foam protective blanked as
required.
11. Maintain a foam protective blanket as required
or as duration allows.
12. Always be aware of hazards, wind conditions
and remaining fire suppression duration.
13. Once fire suppression is completed, secure
system as contained in Section 2 “Normal
Operations”.
14. Ensure water truck is completely washed down
after fire suppression operations.
To Next Page
Loading...