Mega MAC - Page 71

MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-4
MAC/MTT-OPS(CL)-1
26 FEB 2019
6. (Front Bulkhead Location Only) Solenoid
Control Box – CHECK AND SECURED
7. MTT Front Mounts – CHECKED AND SECURED
8. Vehicle Hydraulic Tank – SERVICED
9. MTT Hydraulic Hoses & Cabling – CHECKED FOR
SECURITY AND LEAKS
10. Chassis Pivot Bore Pins – INSTALLED AND
SECURED
11. Tank Drain Petcocks – CLOSED
12. Spray Heads – SECURED AND SET
13. Water Pump – CHECKED
a. Water Pump – Check to ensure volute case
drain valve is closed. Pump bracket for
evidence of overheating.
b. Drive Motor – Evidence of overheating.
14. Hose Reel – CHECKED
15. (Rear Bulkhead Location Only) Solenoid
Control Box – CHECKED
N-3