MAC/MTT-OPS-1
26 FEB 2019
Appendix
MAC/MTT Operators Checklist
A-13
MAC/MTT-OPS(CL)-1
26 FEB 2019
Once operations are complete:
7. FOAM Switch – OFF
(If equipped with multi water cannons) Ensure
that the FOAM switch is OFF before operating a
different water cannon.
8. Water Cannon – Flow water through the water
cannon nozzle with the FOAM switch off to flush
foam from the nozzle.
9. MONITOR/BFV Switch – OFF
10. Water Cannon Nozzle - STOW
Manual and remote adjustable nozzles must be
stowed pointing vertically to reduce wear on
water cannon joints. Leaving the nozzle in any
other position will cause increased wear on water
cannon joints and result in premature joint
failure.
N-12
To Next Page
Loading...