Megger DLRO10 User Manual

www.megger.com
DLRO10 and DLRO10X
18
7.3 The Battery State Indicator
The Battery State Indicator provides information on the amount of charge in the
battery, but is also used to signal other conditions as follows:
7.3.1 Standard Charging.
The battery module is charging at its standard rate.
Fast
Battery state flashing during charging indicates temperature fault.
7.3.2 WARNING
Connecting to greater than 15 volts can cause permanent damage to the battery
module.
The DLRO10 and DLRO10X can also be powered from a mains / line power supply
unit the DLRO10LPU. This is available as an accessory, details can be found in the
Accessories section of this user guide

Megger DLRO10 Specifications

General

Resolution	0.1 µΩ
Protection	IP54
Test Current	10 A
Resistance Range	0.1 µΩ to 2000 Ω
Display	LCD
Power Supply	Rechargeable battery
Operating Modes	Normal, Auto, Continuous
Accuracy	±0.2%