www.megger.com
OTS80PB and OTS60PB OTS100AF, OTS80AF and OTS60AF
23
Operating instructions
Move UP; DOWN; LEFT; RIGHT to navigate and press OK to select the
required character
Use the same process to enter more Chinese characters.
When entering/editing a syllable, it is not possible to move the cursor to
Chinese characters already entered in the edit field. To edit the Chinese
characters, user needs to ensure there is no syllable, and if there is, use
the backspace button (bottom left button) to delete the syllable first.
The cursor can now move anywhere in the edit field.
Using “Shift 拼音” key, it is possible to switch between alphanumeric
and pinyin modes anywhere in the edit field. Alphanumeric characters
can be used as a prefix or suffix to the Chinese characters according to
your requirement e.g.
Press OK to complete editing or select RETURN to go back to the Home
Screen. The Test ID entry will now be displayed in the Home screen
To Next Page
Loading...
Need help?
General
