Megger OTS100AF - Factory Installed Accessories; Optional Accessories and Spares

20
Only Megger supplied accessories can be used with the OTS range. Non approved equip-
ment cannot be guaranteed to work with the OTS.
Factory fitted accessories depending on order configuration
 Internal printer
 Electrode sets – IEC, ASTM and full electrode set containing one of each type of electrode
 Vessel lid mounted impeller for use with 400 ml vessel(standard red impeller supplied, see page 9)
 Power lead
 PowerDB Lite CD
Optional accessories & spares
 VCM100D voltage check meter 1001-105
 VCM80D voltage check meter 1001-801
 Vessel assembly 400 ml (no electrodes) 1001-473
 Vessel assembly 150 ml (no electrodes) 1001-474
 Vessel lid mounted impeller for use with 400 ml vessel 1001-102
(standard red impeller supplied, see page 9)
 ASTM alternative propeller shaft assembly 1007-153
 IEC alternative propeller shaft assembly 1007-154
 OTS super-user kit 1007-467s
Included accessories:
 Vessel 400 ml assembly
 Vessel 150 ml assembly
 Stirrer lid assembly with standard impeller
 ASTM alternative propeller shaft assembly
 IEC alternative propeller shaft assembly
 The Megger guide to insulating oil dielectric breakdown testing booklet
 Carry case
 Electrode set IEC 156 1001-477
 Electrode set ASTM D 877/1816 1001-478
 Full electrode set – contains all electrodes 1001-479
 Printer paper 25991-001
 Barcode reader, USB 1001-047
 Electrodes - Spherical (pair) 6220-484
 Electrodes - Mushroom (pair) 6220-580
 Electrodes - Cylindrical (pair) 6220-483
 Electrodes - Non-standard cylindrical with
0,5 mm edge radius (pair) 6220-538
 Electrode gauge set 1, 2, 2.5, 2.54 mm 1002-144