To Next PageTo Next PageWhy won’t my Megger TDR2010 Measuring Instruments download data?
If your Megger Measuring Instrument won’t download data, it might be because there are no saved results on the TDR. Take readings and save the results before attempting to download.
Why does my Megger Measuring Instruments keeps ticking?
A ticking sound from your Megger Measuring Instrument is normal if the dual input function is selected. This is due to relays switching input.
Why does my Megger TDR2010 keeps ticking on single input?
If your Megger Measuring Instrument keeps ticking on a single input, it suggests an incorrect connection to the cable under test. The end of the cable has not been determined, preventing it from reaching its maximum range.
What to do if Megger TDR2010 Measuring Instruments won’t charge?
If your Megger Measuring Instrument won’t charge, and the charge icon is flashing, the battery may not be functioning properly. Contact your local Megger dealer for a replacement battery. If the charger is not functioning, indicated by the LED, contact your local Megger dealer for a replacement charger.
General| Output Impedance | 50 Ω |
|---|---|
| Display | LCD |
| Power Supply | Rechargeable battery |
| Battery Life | 8 hours |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20 °C to +60 °C |
| Weight | 1.5 kg |
| Interface | USB |
| Minimum Range | 1 m |
| Resolution | 0.1 m |
| Velocity Factor | 0.30 to 0.99 |
| Display Type | Graphic |
