Technical Support 1-800-345-8172 CASHFLOW SC66 Page-11
www.meiglobal.com Part # 252055066 G1
The cashbox may be fitted with either one or two security locks. The product is designed to
accept locks from a range of manufacturers including: -
Medeco
Kaba
Abloy
VSR
Miwa
Duo
Standard 5/8" and 1-1/8" formats are supported. There is a significant variety of lock designs,
and spacer washers may be required for some lock types. Two locking hasps are shipped with
every cashbox. Contact MEI for cashbox lock specifications.
Locks vary greatly in price, security, keying policies, etc. The customer is responsible for selecting
a lock with performance that is fit for the intended purpose. MEI does not test or endorse any
specific brand of lock for security characteristics.
When only one lock is used, the remaining blank hole does not give access to the contents of the
cashbox. However, some jurisdictions may require a blanking plug. Contact MEI for assistance in
obtaining a suitable plug.
When two locks are installed, they must rotate in opposite directions. See the figure below.
Unlock
Unlock
INSTALLATION
Bottom View of Cashbox
Installing Locks On The Cashbox
To Next Page
Loading...
Need help?
General
