Meinberg SyncBox N2X - Status Leds; 10;100 Base-T Ethernet (IEEE 803.2); Configuration

10 Attachment: Technical Information
10.6 Status LEDs
LED Indicators
LI - Link: lights up in the same color as SP-Speed,
on or off, if no link is available
SP - Speed: red no link available
yellow 10Mbit
green 100Mbit
IN - Input: red no reference
yellow reference is available
green - blinking synchronous
green oscillator has locked
ST - Status: blue during initialization
green normal operation
red error
LI
SP
IN
ST
10.7 10/100base-T Ethernet (IEEE 803.2) / Configuration
Link speed: 10/100 MBit
Connector Type: 8P8C (RJ45)
Cable: CAT 5.0
Duplex Modes: Half/Full/Autonegotiaton
LAN x
SyncBox N2X Date: 17th September 2019 47