5 The System SyncBox
5 The System SyncBox
The Meinberg SyncBox N2X is synchronized by a PTP
Grandmaster or by a NTP Server and can be used as
a time source for equipment that requires IRIG AM,
Freq.Synth/sine, PPO (PPS, PPM, PPH, IRIG DCLS,
Cyclic Pulses, Single Shot, Timer, DCF77 Mark, Time
Sync, Freq. Synth./TTL, Time Slots) or serial time
string for synchronization.
The SyncBox/N2X operates as a IEEE-1588 multicast slave clock or NTP client in a PTP / NTP network
and with its interfaces this converter can synchronize many different systems. Our IEEE-1588 Grandmaster or
LANTIME NTP Server, such the LANTIME M600, can be used as a reliable time source.
In order to support network management systems the SyncBox offers an extensive SNMP interface, which
can be accessed by SNMP V1. It allows the monitoring of all relevant system parameters - including operating
system parameters, network interface statistics, detailed NTP status information as well as the complete system
configuration.
The SyncBox N2X is equipped with a high precision oscillator "TCXO". The oscillator determines the long-term
stability in holdover mode, ie when the synchronization with the time source is disturbed. Oscillator update to
OCXO-HQ is possible.
SyncBox N2X Date: 17th September 2019 17
To Next Page
Loading...
