021
MA3 Integrated D/A Converter Manual
meitner © 2020 Meitner Audio, All Rights Reserved. Meitner Audio reserves the right to amend specifications & design without notice.
mConnect Control App
Sync, Volume and Mute Features
1. Once playback is initiated using the mConnect app, the MA3 will sync and
automatically switch to the “NET” (network) input. Prior stored volume
settings will used, or the initial factory default volume setting “0” will be set.
“NET” volume is displayed as a numerical value (0 to 100) instead of dB.
2. Please see mConnect interface pictures to the right:
• Mute control button (outlined in red), mutes and unmutes the MA3
• Coarse volume control (outlined in green). Please note: Coarse volume
control is touch/click based. Accidentally setting the volume to
maximum or a high setting may cause damage to your speakers or
system. It is strongly recommend to use the fine volume interface,
remote or volume knob to to more precisely control volume settings.
• Enables the fine volume control interface (outlined in yellow). Touch and
drag style interface for fine volume control (bottom picture).
3. Volume and mute control is bi-directional, any change made using the app
will be reflected on the MA3’s display. Similiarly, changes made using the
volume knob or remote will be shown on the app.
4. If the input is switched away from the “NET” input while playing a track,
playback of that track will be paused. Track playback can then be resumed
using mConnect with the last stored “NET” input volume/mute settings.
5. Sync, volume and mute functions using the Roon app behave the same way
when using the MA3 as a Roon Endpoint.
Fine drag
volume control
Coarse touch
volume control
To Next Page
Loading...