iii
Single-Head Embroidery Peripheral
EP 1 Specifications
Maximum embroidery speed
1000 stitches per minute
Number of Heads
1
Number of needles
1
Dimensions
46cm W x 36cm H x 52cm D
18" W x 14" H x 20.5" D
Weight
26kg
58 lbs
Shipping weight
31kg
68 lbs
Power consumption
60 W; wired for 200V to 250V 50 or 60Hz
2 fuses, 800mA Fast Blow (FB)
Noise level and test conditions
Equivalent continuous A weighted sound pres-
sure level at 1 meter from the machine is 66db.
The peak C weighted instantaneous sound
pressure level is 71db.
The noise level was measured sewing a test
design at 600 spm.
Recommended power conditioning equip-
ment
LC 1800 Line stabilizer (available from
Accessory Resource Corporation)
Embroidering field size
24 x 14cm (9.5 x 5.5")
Compatibility
Premier, EDS-EZ, and EDS III
Intended use
The EP 1 is designed to embroider on textile
products which are placed easily in a Melco
embroidery hoop. The machine should not be
used on thick leather, wood, plastic, or other
dense material.
To Next Page
Loading...
