8. Dispensing products
As soon as the machine is heated up, the products
that can be currently dispensed are shown in the
display. If products are not available, for example,
because of a shortage (see chapter 13), they are not
displayed.
8.a Placing the vessel
Place the vessel below the respective beverage spout:
Coffee and milk products spout
Hot water spout
Steam pipe.
Place individual cups centred or two cups net to one
another under the coffee and milk product delivery.
small cups on top of the cup tray by folding it
down.
large cups, pots or glasses on the drip grill
below by folding the cup tray up.
8.b Product selection
To dispense a coffee and milk product, push the
button next to the respective product depiction in
the display.
To dispense hot steam, operate the steam valve
above the steam pipe.
Depending on the presetting by technical service you
can cancel the product output by releasing
(pressing) or by pressing the product button again
(resting).
8.c Twin function
If this function has been activated by customer
service, you can dispense coffee products as …
twin products: By a single push of the button
next to a twin product, it is dispensed into two
small cups side by side or into one large cup.
Repeating single / twin products: By pushing
the button repeatedly, the selected product is
dispensed several times in sequence. The
remaining number is shown on the display.
8.d Reducing the number / cancelling dispensing
If the "Cancel" symbol above this button is
shown, you can reduce the number of products to
be dispensed by "1" with each push of the button
and finally even cancel the running dispensing
action.
Display with more than eight products, they are
distributed on multiple pages
To Next Page
Loading...
Need help?
General
