10.c Preparing to clean
If you are using a milk system and it is designed as …
Refrigerator, remove the milk container from it
and put a cleaning container in its place.
Other type of milk container, remove it and put
a cleaning container in its place.
P Fill the cleaning container with a prepared
cleaning solution, consisting of 500 ml cold
water with 25 ml "SWIRL RFM Cleaner".
10.d Sequence of the cleaning programs
If both systems are to be cleaned, cleaning always
starts with the milk system. The brewing system is
only cleaned next.
If the milk system is not used, you can skip the
related instruction steps.
Cleaning the milk system:
As soon as "Cleaning agent prepared" appears
in the display, …
P Place the milk suction hose into the prepared
cleaning solution and confirm with "OK".
The milk system is now cleaned.
As soon as "Rinsing prepared" appears in the
display, …
P empty the container with the cleaning solution
and fill it with 500 ml clear water. Now insert the
milk suction hose into the clear water and confirm
with "OK".
The milk system is now rinsed.
GB
To Next Page
Loading...
Need help?
General
