The "Easy Cleaning" programme can also
be run manually.
Requirement: The appliance is ready for
operation.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for 2sec-
onds.
» The menu appears on the display.
3. Navigate to the Care > Easy Cleaning
menu.
4. Use the arrow buttons to select Start
and conrm with "menu/ok".
5. Follow the further instructions on
the display up to the end of the "Easy
Cleaning" programme.
» The appliance is ready for operation.
9.5 "Cleaning milk system"
programme
This programme is used to clean the milk
system with the aid of a milk system clean-
ing agent.
To maintain hygiene and avoid damage
to the appliance, we recommend carrying
out the cleaning programme once a week.
The cleaning programme takes approx-
imately 3 minutes and should not be
interrupted.
ATTENTION
The use of unsuitable milk system clean-
ing agents can damage the appliance.
Only use Melitta® PERFECT CLEAN milk
system cleaning agent for fully auto-
matic coee makers.
Observe the processing instructions
on the packaging of the milk system
cleaning agent.
Requirement: The appliance is ready for
operation.
1. Place a vessel with a capacity of at least
0.7 litres beneath the outlet (e.g. the
coee grounds container).
2. Press the "menu/ok" button for 2sec-
onds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk
system menu.
4. Use the arrow buttons to select Start
and conrm with "menu/ok".
5. Follow the further instructions on the
display up to the end of the milk system
cleaning programme.
» The appliance is ready for operation.
Cleaning the milk unit
In addition, we recommend cleaning the
milk unit, the milk hose and the milk con-
tainer regularly.
Information
ū The plastic milk container (depending
on the model), without lid and riser
pipe, is dishwasher-safe.
ū The thermal milk container (depending
on the model) and its individual parts
must not be cleaned in the dishwasher.
7
43
43
Fig. 23: Removing the milk unit, 1
To Next Page
Loading...
