Melitta Caffeo Solo & Milk - Other Settings; Brewing Temperature; Adjusting the Grinding Fineness

26
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes in the
factory.
• Switch on the appliance.
• Press the and buttons
simultaneously until ashes.
• Press the button twice.
illuminates.
• Press the button until one of the four
times is set. The time is displayed by the
beans on display 9.
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
ashing
Off
• Press the button to conrm the
setting.
Auto-OFF function
The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes .
• Switch on the appliance.
• Press the and buttons
simultaneously until ashes.
• Press the button three times.
illuminates.
• Press the button until one of the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display Time
30 minutes
(factory setting)
2 hours
4 hours
ashing
8 hours
• Press the button to conrm the
setting.
Brewing temperature
The brewing temperature is factory-set at
level 2 (medium ).
• Switch on the appliance.
• Press the and buttons
simultaneously until ashes.
• Press the button four times.
illuminates.
• Press the button, until one of the
three brewing temperatures is set. The
temperature is shown by the beans on
display 9 (from = low to =
high).
• Press the button to conrm the
setting.
Adjusting the grinding neness
The grinding neness was set before the
appliance was delivered. We therefore
recommend to only adjust the grinding
neness after about 1 000 coffee
preparations (about 1 year).
The grinding neness should only be
adjusted immediately after starting coffee
dispensing and only while the mill is
running.
BA_Solo_Milk_082016.indd 26 21.09.2016 07:23:15