Melitta Cafina XT4 - Tab Cleaning; Tab Filling Levels

7�3 Tab “Cleaning”
Here you have the option of cleaning the machine or
switching it off.
000565
Next cleaning
today
Clean full system
Clean and switch off
full system
Rinse mixer
Clean touch screen
Cleaning
Switch off
Fig. 31: Cleaning
1. Carry out the required option:
Note
For hygiene reasons, the machine must be
switched off only in a cleaned state.
The “Switch off” function is permitted to
be used only if a cleaning process of the full
system has been carried out and no further
products have been dispensed.
Option Options
Clean full system Clean the milk and brewing
system, then continue machine
operation, see chapter 8.7 on
page 29
Clean touch
screen
Clean the touch screen while
the display is locked, see
chapter 8.12 on page 35
Clean and switch
off full system
Clean the milk and brewing
system, then switch off the
machine, see chapter 5.1.3 on
page 11
Rinse mixer If required, rinse the mixer unit,
see chapter 8.9 on page 33
Switch off Switch off the machine
9 The selected option is carried out.
7�4 Tab “Filling levels”
Besides confirming the filling levels as described in
chapter 5.4 on page 14, you can also make further
settings on the filling levels in the manager menu.
000480
Bean container 2Bean container 1 Instant container
1
Filling levels
Milk container refilled
1
Fig. 32: Filling levels
1. Press the required filling level display, e.g., of the
bean container 1 (1).
͵ A new window opens.
000481
Filling level Bean container 1
Designation
Set to 100 %
Bean container
1
Cancel Save
Shortage threshold
1
3
2
Fig. 33: Further filling settings
2. The “Designation” button (2) can be used to change
the name of the container.
If the filling level for a consumable drops below a set
value while a product is being dispensed, a warning will
appear on the display.
3. The “Shortage threshold” button (1) is used to set a
percentage at which a warning is issued for the filling
level.
͵ Enter the number “Zero” to switch this warning
off.
4. Press the “Save” button (3) to adopt the settings and
return to the previous screen.
9 The filling level settings have been changed.
Settings
24
35878 • 20201001
7