Melitta Cafina XT4 - Parameters for Cleaning

7�5�3 Sorting the dispensing view
1. Press the required product group or product button.
2. Press the “Move” button (5) (see Fig. 34).
͵ A new window opens.
3. Press the dispensing position where the product
group or product button should be moved to.
͵ If there is a product group or product button al-
ready, they will swap places.
4. Confirm the moving with the “OK” button.
9 The dispensing view has been sorted.
7�5�4 Editing the dispensing view
1. Press the required product group or product button.
2. Press the “Change” button (4) (see Fig. 34).
͵ The window to add a product opens (see Fig. 35).
3. Continue as described from Fig. 35.
9 The dispensing view has been edited.
7�5�5 Delete displays
1. Press the required product group or product button.
2. Press the delete symbol (6) (see Fig. 34).
3. If prompted to confirm the deletion, press the
“Delete” button to delete the product group or
product button.
Note
Only the display on the screen is deleted. The
products remain stored on the machine.
9 The display for the product group or dispensing
product has been deleted.
7�6 Tab “Product parameters”
Here you can change the values for product components,
if enabled by customer service.
000569
Product parameters
Product nameNo.
Café Crème *
Café Crème **
Café Crème large
Hot water
Espresso
Steam
Café Crème ***
Edit
Components
1
2
Fig. 37: Product list
1. To display all programmed products, select one of
the following options:
• Use the “˄” and “˅” buttons to move the list.
• Slide the bar (2).
• Swipe in the list up or down.
2. Press on a product to edit it.
3. Press the “Edit” button (1).
͵ A new window opens.
4. Select one of the following options:
Option Options
General Change product image, product
name and other general settings
Mixing sequence View the sequence of the
individual product components
Settings of
components
Change the settings of the
individual product components
Billing If a billing system is connected,
adjust settings for an accounting
9 The values of the product components have been
changed.
Settings
26
35878 • 20201001
7