Melitta CI E970-103 - Editing User Profiles

29
Operation of the menus
Operating Instructions: Melitta
®
CI
®
| 1834-0618 | 2018-08
GB
“My Coffee” sub-menu
Here, different beverage settings can be
set and saved for standard dispensing and
for "My Coffee" dispensing.
■ Settings for standard dispensing:
The settings saved in the standard
profi le can be directly accessed using
the respective dispensing buttons.
■ Settings for My Coffee dispensing:
Defi nes individual beverage settings for
up to four people. Beverages with the
defi ned setting can be accessed later by
selecting the respective profi le with the
My Coffee button.
Editing user profi les
■ Call up the My Coffee sub-menu
■ Select the desired user profi le. When
using for the fi rst time, Name 1 to Name
4 as well as Standard are available for
selection.
Entering a user name
■ Call up the My Coffee sub-menu
■ Select the desired user profi le.
■ Select Change name in the menu.
■ Select the individual letters of the
name. The fi rst letter is automatically
capitalised. Up to 9 characters can be
entered.
■ Select  to delete a letter.
■ Select the empty fi eld to enter a space.
■ Select Exit to save the name.
Entering user settings for beverages
■ Call up the My Coffee sub-menu
■ Select the desired user profi le.
■ Select a beverage (e.g., Latte Macchiato).
■ Select a property (e.g., milk quantity).
■ Select the desired quantity (e.g., 80 ml).
If the setting for a given property is not
changed, the factory setting will be used.
Direct save function
If settings such as the dispensed quantity
or coffee strength are changed during
My Coffee dispensing, the changes will
be directly saved under the current user
name.
The following settings are possible:
■ Dispensed quantity: 30 ml to 220 ml
■ Coffee strength: can be adjusted in four
levels
(from
= mild to very
strong)
■ Brewing temperature: low, medium, high
■ Milk froth quantity: 10 ml to 220 ml
■ Milk quantity: 0 ml to 220 ml
Switching user to enabled/disabled
Users can be switched to disabled.
Disabled users remain stored in the
appliance, but cannot be selected using
the My Coffee button
.
■ Call up the My Coffee sub-menu
■ Select the desired user profi le.
■ Select Enabled/disabled in the menu.
■ Select Disabled in the menu. A tick
appears next to Disabled to confi rm.
■ Proceed in the same way to switch
a user back to Enabled, only select
Enabled in the menu.