38
Transport, Storage and Disposal
Operating Instructions: Melitta
®
CI
®
|
1834-0618 | 2018-08
GB
Troubleshooting
Malfunction Cause Measure
Coffee only fl ows
drop-by-drop.
Grinding fi neness is too fi ne.
Adjust the grinding fi neness more
coarse.
Clean the brewing unit.
Perform a descaling or cleaning
programme if necessary.
Coffee does not fl ow.
Water tank not fi lled or
incorrectly inserted.
Fill the water tank and make sure it
is properly inserted.
The brewing unit is clogged. Clean the brewing unit.
Grinder does not grind the
coffee beans.
Beans do not drop into the
grinder (beans are too oily).
Tap lightly on the bean container.
Foreign objects in the
grinder.
Call the hotline.
The tilt lever is vertical.
Move the tilt lever to the right or
left.
Loud grinder noise.
Foreign objects in the
grinder.
Call the hotline.
Bean symbols
are
fl ashing although the bean
container is full.
Insuffi cient quantity of
ground beans in the brewing
chamber.
Press the button for cup
dispensing.
Appliance indicates "no
water" even though the
water tank is fi lled.
illuminates on the
display.
The fl oat is blocked.
Check the condition of the fl oat in
the water tank, remove the water
and carefully shake the tank.
The brewing unit can no
longer be reinserted after
removal.
The brewing unit is not
properly locked.
Check whether the handle for
locking the brewing unit is correctly
engaged.
The actuator is not in the
proper position.
Simultaneously press on the
ON/OFF button and the
My Coffee
button
. The appliance now
runs the initialisation process.
System error shown on the
text display
Software error
Switch the appliance off and switch
it on again with the ON/OFF button
; if this does not solve the
problem call the hotline.
To Next Page
Loading...
Need help?
General
