32
Adjusting the grinding fi neness
Operating Instructions: Melitta
®
CI
®
|
1834-0618 | 2018-08
GB
Adjusting the grinding
fi neness
The grinding fi neness level was optimally
adjusted prior to delivery. It is therefore
recommended to only adjust the grinding
fi neness after about 1 000 coffee
preparations (about 1 year).
The grinding fi neness can only be set
while the mill is running. Thus, the
grinding fi neness should be adjusted
directly after coffee dispensing starts.
If the coffee fl avour is not suffi ciently
intense, it is recommended to set a fi ner
grinding level.
Set the grinding fi neness with the lever 14.
▶ To the right = Coarser grinding fi neness
▶ To the left = Finer grinding fi neness
Cleaning and maintenance
WARNING
Electric shock hazard due to supply
voltage!
▶ Pull the power supply plug before
cleaning.
▶ Never immerse the appliance in
water.
▶ Do not use a steam cleaner.
Daily cleaning
■ Wipe the outside of the appliance with a
soft damp cloth and normal dishwashing
liquid.
■ Empty the drip tray.
■ Empty the coffee grounds container.
Cleaning the brewing unit
It is recommended to clean the brewing
unit once a week.
■ Switch off the appliance.
■ Pull off the cover 13 to the right.
■ Press and hold the button on the handle
of the brewing unit (Image E).
■ Turn the handle clockwise until the stop.
■ Pull the brewing unit out of the appliance
by the handle.
■ Rinse the brewing unit thoroughly on all
sides with clear water. The area shown
in Image F (arrow) must be free of
coffee residues.
■ Let the brewing unit drip dry.
■ Remove coffee residues from the
appliance.
■ Insert the brewing unit back into the
appliance, press (and hold) the red
button (Image E) and turn the handle of
the brewing unit counterclockwise until
the stop.
■ Insert the cover until it clicks in.
To Next Page
Loading...
Need help?
General
