Melitta CI Touch User Manual

Permanently changing beverage settings
41
GB
Changing beverage settings during
preparation
The beverage quantity and the coee
strength can be changed during beverage
preparation.
Requirement: The appliance is ready for
operation.
During beverage dispensing (coee
or milk), use the "rotary switch" to
set the respective beverage quantity.
During the grinding process, use the
"Coee strength" button to set the
coee strength.
5.7 Stopping beverage
preparation
To stop beverage preparation prematurely,
press the selected direct key again.
5.8 Preparing two beverages
simultaneously
The "2 cups" button is used to pre-
pare two beverages.
Information
Two-cup dispensing is not possible for
beverages mixed with hot water (amer-
icano), for milk froth, warm milk or hot
water.
8
26
Fig. 11: Two-cup dispensing
1. Place two vessels beneath the out-
let(8).
2. Press the "2 cups"button (26).
3. Continue as described for the relevant
beverage preparation.
Information
 This setting only applies to the next
beverage preparation.
 If a beverage is not prepared within
1 minute, the appliance switches to
single-cup dispensing.
6 Permanently changing
beverage settings
The appliance oers further options for
preparing coee specialities.
6.1 Changing default settings
Depending on the beverage, the following
default settings can be changed:
Coee amount, amount of froth, milk
amount, hot water amount, coee
strength and temperature.
Changing the beverage settings is similar
for all beverages. Changing the coee
strength for an Espresso is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the
Direct keys > Espresso > Coee strength
menu.
3. Select the desired coee strength and
conrm your selection.
4. Select the Exit command to exit the
menu.
» The selected coee strength is used the
next time an espresso is prepared.
Information
The default settings remain valid until they
are changed again.

Melitta CI Touch Specifications

General

Product type	Espresso machine
Capacity in cups	- cups
Hot water system	Yes
Milk adding type	Pipe
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.8 L
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Control type	Touch
Display type	TFT
Product color	Black
Pallet width	800 mm
Pallet height	1821 mm
Pallet length	1200 mm
Pallet weight	215000 g
Package depth	387 mm
Package width	419 mm
Package height	571 mm
Package weight	11560 g

Weight and Dimensions

Depth	352 mm
Width	252 mm
Height	473 mm