Melitta CI Touch User Manual

Personal settings – "MyCoee"
42
GB
7 Personal settings
– "MyCoee"
The "My Coee" function lets you to save
personal beverage settings and assign
them to a user.
7.1 Editing personal user
proles
Up to four user proles can be used.
Changing the name of a user prole
The names of the user proles can be
changed.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Select Change name and conrm your
selection.
» The menu for selecting individual
characters appears.
5. Select individual characters by turning
the "rotary switch" and conrm each of
them.
6. Repeatedly select the Exit command to
exit the menu.
Activating/deactivating a user prole
Only users whose prole is activated can
be used.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Select Enabled/disabled and conrm
your selection.
5. Select Enabled or Disabled and conrm
your selection again.
6. Select the Exit command to exit the
menu.
7.2 Selecting/changing per-
sonal settings
Depending on the beverage, the following
settings can be assigned to a user:
Recipes, coee amount, amount of froth,
milk amount, hot water amount, coee
strength and temperature.
The assignment of personal settings to a
user is always similar. Setting the coee
amount for a Cappuccino is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Navigate to the Cappuccino > Coee
amount menu.
5. Select an amount and conrm your
selection.
6. Select the Exit command to exit the
menu.
» The next time a cappuccino is prepared
by the user, the selected amount of
coee is used.
7.3 Preparing beverages with
personal settings
The preparation of beverages using
the "My Coee" function is similar
for all beverages. The preparation of a cap-
puccino is described here as an example.
1. Place a vessel beneath the outlet.
2. Press the "myrecipes" button until the
desired user is shown on the display.
3. Press the "Cappuccino" button.
» Beverage dispensing is carried out
and ends automatically.
4. Remove the vessel.
» EasyCleaning? appears on the dis-
play. (Press rotary switch to start).
5. Run the EasyCleaning programme or
prepare further beverages and run the
EasyCleaning programme later, see
section9.4.

Melitta CI Touch Specifications

General

Product type	Espresso machine
Capacity in cups	- cups
Hot water system	Yes
Milk adding type	Pipe
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.8 L
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Control type	Touch
Display type	TFT
Product color	Black
Pallet width	800 mm
Pallet height	1821 mm
Pallet length	1200 mm
Pallet weight	215000 g
Package depth	387 mm
Package width	419 mm
Package height	571 mm
Package weight	11560 g

Weight and Dimensions

Depth	352 mm
Width	252 mm
Height	473 mm