Melitta Purista User Manual

Changing basic settings
41
GB
2.  Press the "Service" button
repeatedly until the display for the Auto
O function appears.
3. Press the "Coee strength" button
repeatedly until the desired time is set.
4. You can call up the next function
or exit Service mode:
a) Briey press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2seconds to save the setting
and exit the service mode.
6.3 Setting the water
hardness
Setting the water hardness regulates how
frequently you are requested to descale
the appliance. The harder the water, the
more frequently the appliance has to be
descaled.
Information
Water hardness cannot be set while using
a water lter (see section7.5 Using a water
lter on page48).
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip packaging and in the
table Water hardness range on page51.
The following settings are possible:
Display Water hardness
soft, descale after 150litres

medium, descale after 100litres
 
hard, descale after 70litres
 
ash
very hard, descale after 30litres
no
coee beans
A water lter is used. No adjust-
ment is possible.
Requirement: The appliance is ready for
operation.
1. Press the "Service" button for
more than 2seconds to call up Service
mode1.
2.  Press the "Service" button
repeatedly until the display for the
Water hardness function appears.
3. Press the "Coee strength" button
repeatedly until the desired water
hardness is set.
4. You can call up the next function
or exit Service mode:
a) Briey press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2seconds to save the setting
and exit the service mode.
6.4 Activating/deactivating
switch-o rinsing
Rinsing is always carried out immediately
after switching on the coee system. Only
switch-o rinsing can be activated/deacti-
vated. If it is activated, the coee system is
rinsed after being switched o.
Information
We recommend that you do not per-
manently deactivate switch-o rinsing,
because switch-o rinsing cleans the
coee system.
The following settings are possible:
Display Switch-o rinsing
activated
no coee beans deactivated
Requirement: The appliance is ready for
operation.
1. Press the "Service" button for
more than 2seconds to call up Service
mode1.

Melitta Purista Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Hot water system	-
Number of spouts	2
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Adjustable coffee spout height range	0 - 135 mm
Cappuccino making	No
Control type	Buttons, Rotary
Display type	LCD
Product color	Black, Silver
Package depth	380 mm
Package width	300 mm
Package height	545 mm
Package weight	8730 g

Weight and Dimensions

Depth	455 mm
Width	200 mm
Height	325 mm