Melitta Purista - Transporting the Appliance; Disposing of the Appliance

Transport, storage and disposal
50
GB
(see section3.4 Switching on the appliance
for the rst time on page35).
Requirement: The appliance is ready for
operation.
1.  Press the "Service" button as
well as the "Coee" direct key for more
than 2seconds to enter Service
mode2.
2.  Press the "Service" button
repeatedly until the display for the
Venting function appears.
3. Press the "Service" button for
more than 2seconds to start venting.
» The Ready display ashes until
venting is ready to start.
» The Water display lights up and
requests you to remove the water
tank.
4. Remove the water tank and empty it.
» The appliance is vented and switches
o automatically.
8.2 Transporting the
appliance
ATTENTION
Freezing residual water can damage the
appliance.
 Prevent the appliance from being
exposed to temperatures below 0°C.
Transport the appliance in the original
packaging. This avoids damage in transit.
Before transporting the appliance, carry
out the following activities:
1. Vent the appliance (see section8.1
Venting the appliance on page49).
2. Empty the drip tray and the coee
grounds container.
3. Empty the water tank.
4. Empty the bean container.
5. Clean the appliance (see section7.1
General cleaning on page44).
6. Package the appliance.
Information
 When sending the appliance to Melit-
ta's service centres, it is not necessary
to send in the cup plate. This prevents
scratches during transport.
 Do not use commercially available
adhesive and packing tapes to attach
loose parts. When detached, adhesive
residues remain on the appliance
which are dicult to remove.
8.3 Disposing of the
appliance
Appliances marked with this symbol
are subject to European Directive
2002 / 96 / EC for WEEE ( Waste Electri-
cal and Electronic Equipment).
Electrical appliances do not belong in
domestic waste.
Dispose of the appliance in an environ-
mentally friendly manner via suitable
collection systems.