Why server unable to find Mellanox Technologies Projector adapter?
If the server is unable to find the Mellanox Technologies Projector adapter, make sure the adapter slot and the adapter are compatible.
How to fix server unable to find Mellanox Technologies Projector adapter?
If the server is unable to find the Mellanox Technologies Projector adapter, ensure that the adapter is placed correctly.
Why are packets being lost on Mellanox Technologies ConnectX-3 Adapter?
General| Product Name | ConnectX-3 |
|---|---|
| Product Type | Network Adapter |
| Manufacturer | Mellanox Technologies |
| Category | Adapter |
| Interface Type | PCI Express 3.0 |
| Maximum Data Rate | 40 Gbps |
| Data Transfer Rate | 40 Gbps |
| Data Rate per Port | 40 Gbps |
| Ports | 1 or 2 |
| Connector Type | QSFP |
| Supported Protocols | Ethernet, InfiniBand |
| InfiniBand Support | Yes |
| Virtualization | SR-IOV |
| RDMA Support | Yes |
| RoCE Support | Yes |
| iWARP Support | Yes |
| Form Factor | Low Profile |
| Compliance | RoHS |
| InfiniBand Data Rates | QDR (40 Gbps), FDR (56 Gbps) |
| Operating Temperature | 0°C to 55°C |
| Ethernet Standards | IEEE 802.3ae (10 GbE), IEEE 802.3ba (40 GbE) |
Overview of Mellanox Ethernet adapters, RDMA, and performance benefits.
Lists key features like low latency RDMA, QoS, dual ports, and offloads.
Lists compatible OS like RHEL, SLES, OFED, Windows Server, and VMware ESX.
Describes physical interfaces including QSFP+, SFP+, PCIe, and LEDs.
Details QSFP+ and SFP+ port compliance with Ethernet standards.
Explains the function of Link and Activity LEDs based on speed and status.
Specifies hardware (PCIe slot) and software prerequisites, including BIOS and iDRAC.
Lists critical safety measures for handling and installing hardware to prevent injury.
A checklist to verify system requirements and card condition before installation.
Provides step-by-step guidance for installing adapter and mezzanine cards.
Instructions for inserting and removing network cables from adapter ports.
Covers downloading, installing, and uninstalling Mellanox OFED for Linux.
Details features like iSER, QoS, Time-Stamping, Flow Steering, and SR-IOV.
Instructions for installing Mellanox drivers for VMware vSphere environments.
Guide to downloading and installing Mellanox OFED for Windows (WinOF).
Explains QoS configuration and RDMA over Converged Ethernet for Windows.
Covers iSCSI boot configuration for RHEL/SLES and Windows clients.
Details the configuration steps for PXE booting SLES11 SP3.
Troubleshooting common issues like adapter detection, connectivity, and LEDs.
Troubleshooting specific to Linux, including firmware, environment, and card detection.
Troubleshooting specific to Windows, covering performance, driver issues, and event viewer errors.
Lists compliance statements for FCC, EN, ICES, VCCI, and KCC certifications.
Shows how to view firmware and UEFI version numbers in Dell System Setup.
Details configuration of boot protocol, VLAN mode/ID, and Option ROM status.
Explains how to override default iSCSI settings and replace DHCP configuration.
Allows configuration of Global Flow control settings for adapter ports.
Guides on enabling and configuring SR-IOV at system and adapter levels.
To Next Page
