Interfaces
Rev 2.2
71Mellanox Technologies
3.2.1.2 Fan Status LED
Figure 67: Fan Status LED in SN2700 - Front and Rear Sides
Figure 68: System Status LEDs - Front Side in SN2740
Table 16 - System Status LED Assignments
LED Behavior Description Action Required
Solid Green The system is up and running nor-
mally.
N/A
Flashing Green The system is booting up. Wait up to five minutes for the end of the
booting process.
Solid Red Major error has occurred. For
example, corrupted firmware, sys
-
tem is overheated etc.
If the System Status LED shows red five
minutes after starting the system, unplug
the system and call your Mellanox repre
-
sentative for assistance.
Both of these LEDs in the red
ovals show the fans’ status.
The LED in the red oval shows the fans’ status.
To Next Page
Loading...
Need help?
General
