20 D39374 | Date 08/2018
Delivery, transport and setting up
3.1 Delivery
The appliance is packed in cardboard and is delivered on a wooden palette.
3.2 Transport
The appliance can be transported in three ways:
► With a forklift truck; move the forks of the truck entirely under the pallet.
► On a manual pallet jack
► (only with the lifting device)
3.3 Unpacking
To avoid damage, do not unpack the appliance until you reach the installation site.
Remove the cardboard packaging by pulling it upwards or carefully cutting along an
edge.
3.3.1 Checking for completeness and transport damage
► Check the delivery note to ensure that the scope of delivery is complete.
► Check the appliance for damage.
If you notice deviations from the delivery note, damage or irregularities, do not put the
appliance into operation but inform the haulage company and the manufacturer.
3.3.2 Remove the transportation lock
Remove the transportation lock. It is located between the door hinge, door and frame
and has to be removed after opening the door.
3.3.3 Disposing of packaging material
Dispose of the packaging material (cardboard, wood, foil) in accordance with the appli-
cable disposal regulations for the respective material in your country.
3.4 Storage after delivery
If the appliance is first to be stored after delivery: Read the storage conditions from page
64.
To Next Page
Loading...
