- 12 -
Connect an antenna, cable, or cable box to watch TV as follows:
1
Make sure the power is off on the TV and cable/satellite box (if using).
2
Connect the coaxial cable into the Coaxial jack on the rear of the TV.
3
Turn on the TV (and box, if used).
4
Press the SOURCE button and then select TV using the Navigation q/p buttons.
Conrm by pressing the OK button. Follow the on-screen instructions for the Setup
Wizard (see page 34).
Antenna
Box
Terminal
Coaxial (75Ω)
NOTES:
• Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
• The HDTV’s tuner is designed for HDTV, therefore requires a stronger signal than normal TVs. If you cannot achieve that
signal level with your antenna or cable, your HDTV might lose picture or sound.
INSTALLATION
Antenna or Cable Coaxial Connection
To Next Page
Loading...
