Memorex MVDT2002A - Picture Control Adjustment

29
Picture controls are factory preset but
you can adjust them individually as
follows:
Picture control adjustment
NOTES:
• The CONTRAST default setting is
set to maximum at the factory.
• The On-screen display will disap-
pear 60 seconds after finishing an
adjustment or by pressing SETUP/
TV MENU three times.
The setting can only be adjusted
when they are displayed on the TV
screen.
1
Press SETUP/TV MENU in the TV/VCR mode.
The TV/VCR menu screen will appear.
2
Press or to select
option.
3
Press or to select
“PICTURE”, then press
.
4
Press or to select the item
you want to adjust. Press
or
to adjust the setting.
5
After your desired setting press SETUP/TV MENU until the
menu screen is cleared.
CANCEL
Pressing CANCEL while making picture adjustments will return all
adjustments to the factory preset levels.




 


CH

BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
0
+32
0
0
0
////
CANCEL / MENU
CH
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
decrease brightness
decrease contrast
be pale color
be reddish color
increase brightness
increase contrast
be brilliant color
be greenish color
makes picture clearermakes picture softer




 



CH
5V40401A [En]26-29 2/3/06, 5:59 PM29