43
Preparation / Status display of disc
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the
player's operation. Disconnect the AC
power cord once, then connect it again.
Preparation
Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press DVD to select DVD mode.
The DVD startup screen will
appear on the screen.
The following pages describe the
setup/operation in DVD mode.
No Disc
00:03:13 01:30:32
1/1
00:03:13 01:30:32
1/2
1/1 Eng 1/2 Fra D
1/2
CT
DVD
Audio CD
Status display of disc
Press DISPLAY/CALL. The status display of the disc will appear
on the screen in order like the figure below.
• When you play a CD disc, the status display will appear and
remain on the screen.
To Next Page
Loading...
