54
Dynamic Range Control
DRC (Dynamic Range Control) ena-
bles you to control the dynamic range
so as to achieve a suitable sound for
your equipment.
NOTES:
• This function works only during
playback of Dolby Digital recorded
discs.
• The level of Dynamic Range Reduction
may differ depending on DVD video
disc.
1
Press DVD to select DVD mode.
Press SETUP/TV MENU in the
stop mode or No Disc.
Press
or to select
option.
2
Press or ENTER to select
“DRC”.
3
Press or to select “On” or
“Off”, then press ENTER.
On: Loud sound such as explosion or similar is toned down
slightly when played back. This makes it suitable for
when it is connected to a stereo.
Off: It plays back at the recording level on the disc.
4
Press SETUP/TV MENU or RETURN to remove the menu
screen.
5V40401A [En]47-54 2/3/06, 6:00 PM54
To Next Page
Loading...
