Memorex MVDT2002A - Loading and Unloading a Cassette Tape

32
Tape speed and maximum recording time
Video cassette tape
Tape Speed
SLP (Super Long Play)
Loading and Unloading a cassette tape
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
To record again
Cover the hole with a piece of adhesive tape.
Erase prevention tab
Screwdriver
Adhesive tape
Automatic tape eject
This unit will automatically rewind the tape when the tape has ended. When the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape the unit power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1
Press EJECT on the unit or the Remote.
2
Remove the cassette tape.
Use only video cassette tapes marked .
Loading
Push the center of the tape until it is automatically
inserted.
T-160 T-120 T-90 T-60 T-30
2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
SP (Standard Play)
5V40401A [En]30-35 2/3/06, 6:00 PM32