53
ENGLISH
PLAYBACK
No picture on screen when
playing back a recorded
tape.
Noise bars on screen.
REMOTE CONTROL
Remote control does not
work.
TV programs cannot be
seen using the TV selector.
The TV is not set to the video
channel 3 or 4.
Tracking adjustment beyond
range of automatic tracking
circuit.
Video heads are dirty.
The tape is worn or damaged.
It is not aimed at the remote
sensor.
Distance too far or too much light
in the room.
There is an obstacle in the path
of the beam.
The batteries are weak.
The +, – polarity of the bat-
teries are not inserted correctly.
The TV/VCR function is in the
VCR mode.
Set to the video channel 3 or 4 or
adjust the fine tuning button on
your TV set.
Adjust tracking manually using
the TRACKING ▲ and ▼ buttons on
remote control.
Have the video heads cleaned.
Try another tape.
Aim it at the remote sensor.
Operate within 15 feet (5 meters)
reduce the light in the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
Set to TV, or turn off the VCR
power button.
POSSIBLE SOLUTIONS PAGE
CAUSE
SYMPTOMS
23
32
–
13
13
13
13
13
–
49
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE PLEASE CALL:
1-800-919-3647
FOR CUSTOMER SERVICE PLEASE CALL OR WRITE TO:
Memcorp Warranty Service
1200 E. Broadway
Princeton, Indiana 47670
(812) 386-3200
4C90301A-E(P50-54) 26'04'1999, 10:45 AM53
To Next Page
Loading...
