Need help?Do you have a question about the Merck Milliflex Oasis and is the answer not in the manual?
General| Brand | Merck |
|---|---|
| Model | Milliflex Oasis |
| Category | Water Pump |
| Language | English |
Lists the necessary hardware components required to operate the Milliflex Oasis system.
Detailed breakdown of components included in the Milliflex Oasis pump, power supply, and sanitization kits.
Explains the function and correct usage of the pump's touch-sensitive switch for operation.
Information on various types of EZ-Fit filtration units and notes on compatibility and usage.
Guidance on following instructions for selected culture media plates.
Step-by-step procedure for operating the pump and performing filtration tests.
Instructions for handling waste and recycling materials after filtration.
A table outlining cleaning and maintenance actions for components at different intervals.
Lists tested active ingredients, suppliers, and dilutions for surface and internal flow sanitizers.
Procedure for cleaning the filtration heads using a surface sanitizer.
Instructions for cleaning the exterior of the pump, tubing, and cable.
Guidance on rinsing the pump with purified water after processing non-water samples.
Steps for cleaning the external gasket of the filtration head, especially for non-water samples.
Detailed procedure for sanitizing the internal flow path of the pump using the sanitization kit.
Comprehensive guide for cleaning all parts of the filtration head, including gaskets and check valves.
Instructions for replacing worn or damaged gaskets and check valves in the filtration head.
Procedure for replacing gaskets on the sanitization kit components.
Lists the necessary components and cables for connecting two or three pumps.
Describes the setup and placement of multiple pumps for operation.
To Next Page
