Page 20 of 24
7. System specifications
Milliflex Oasis
®
pump
Frame Acrylonitrile Styrene Acrylate and Polycarbonate, compatible with standard UV sterilization
Filtration heads Two per pump, stainless steel, silicone, rubber gaskets
Can be autoclaved at 121 °C for 15 minutes or at 134 °C for 5 minutes
Pump dimensions
Height 90 mm (3.5 in.)
Width 230 mm (9.0 in.)
Depth 310 mm (12.2 in.)
Filtration support height 75 mm (2.8 in.)
Weight with filtration heads 3.4 kg (7.5 lb)
Power supply 100V–240V 50/60Hz—One set can be used for up to three pumps
EZ-Fit
®
Filtration Unit
Material of construction
Cover Polystyrene
Funnel Styrene butadiene copolymer (SBC)
Membrane Mixed cellulose esters, PVDF
Support pad (blue units only) Cellulose
Base Acrylonitrile butadiene styrene
Plug (Bulk blue units only) Low-density polyethylene
Dimensions
Height 100 mL: 66.5 mm (2.6 in.)
250 mL: 108.5 mm (4.3 in.)
Largest diameter 75.8 mm (3.0 in.)
Filtration surface 12.56 cm²
Sterilization method EO for blue units, e-beam irradiation for pink units
Milliflex Oasis
®
pump: materials in contact with the liquid filtered
Part Material
Filtration head Stainless steel ASI 316 L
Silicone (gaskets & check valve)
Inner tubing Low-density polyethylene (LDPE)
Tubing fittings Polyphenylsulfone (PPSU)
Polypropylene (PP)
Acetal
Buna N rubber
Core pump module Polypropylene (PP)
FKM (Viton
®
)
PTFE (Teflon
®
)
Drain tubing Silicone
To Next Page
