Merck Milliflex Oasis - Milliflex Oasis Pump Components; Required Items for Milliflex Oasis System

Page 4 of 24
1. Components
1.1 Required items
Three hardware item numbers are necessary to run the system:
1. Milliex Oasis
®
pump for EZ-Fit
®
ltration unit (item MMSYSTEZ1)
2. Milliex Oasis
®
power supply for one to three ltration pumps, specic to
dened regions:
• Australia: item MMPWRSPAU
• Brazil: item MMPWRSPBR
• China: item MMPWRSPCN
• Denmark: item MMPWRSPDK
• Europe: item MMPWRSPEU
• Switzerland: item MMPWRSPSZ
• India: item MMPWRSPIN
• UK: item MMPWRSPUK
• Japan: item MMPWRSPJP
• South Africa: item MMPWRSPZA
3. Milliex Oasis
®
internal ow sanitization kit (item MMSANKIT1)
Optional: For higher throughput capability, it is possible to connect two or
three pumps together without additional power supplies. In this case, the
Milliex Oasis
®
electrical cable for connecting two pumps (item MMCABLEMM)
is required per additional pump.
Consumables: please refer to the ordering information section for details on
the dierent items.
1. Filtration units
2. Culture media
3. Consumables for the Milliex Oasis
®
internal ow sanitization kit