MerCruiser 350 MAG MPI User Manual

Section 5 - Maintenance
90-864195070 JUNE 2007 Page 87
3. Lubricate the steering pin.
mc71904-1
a
a - Steering pin
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Steering pin 92‑883725K01
4. On dual engine boats: Lubricate the tie bar pivot points.
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Tie bar pivot points 92‑883725K01
5. Upon first starting engine, turn steering wheel several times to starboard and then port
to ensure that the steering system operates properly before getting underway.
Throttle Cable
1. Lubricate the pivot points and the guide contact surfaces.
a
b
a
5577
a - Pivot points b - Guide contact surfaces
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Throttle cable pivot points &
guide contact surfaces
92‑883725K01

MerCruiser 350 MAG MPI Specifications

General

Engine Type	V8
Horsepower	300 HP
Ignition System	Electronic ignition
Alternator	65 amp
Compression Ratio	9.4:1
Displacement	5.7L (350 cu in)
Fuel System	Multi-Point Injection (MPI)
Bore x Stroke	4.00" x 3.48" (101.6mm x 88.39mm)