IMPORTANT: If the air box is rotated too far, or disengages from the throttle
body, a hose attached to the air box (hidden in the following illustration) could
disengage. This hose must be restored to its original location. If this hose is
not restored to its original location, the engine will not operate properly.
a - Note the distance
after rotation
6. Carefully remove the recoil starter assembly.
7. Install the medium length screw to retain the air box. Tighten the screw
securely.
8. Shift the outboard into neutral.
9. Ensure the lanyard stop switch is in the run position.
10. Remote control models ‑ Ensure the key switch is in the ON position.
!
WARNING
High voltage is present when starting or operating the engine. Do not touch
any ignition component, wiring, or spark plug lead when starting or
operating the engine.
To Next Page
Loading...
