Mercury 135 Optimax - Page 53

MAINTENANCE
45
• Trim Rod Ball Ends - Turn the ball ends to work the lubricant into the ball sockets.
28458
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants Anti-Corrosion Grease
or 2-4-C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867 Q1
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon Propeller shaft 92-802859Q1
• Propeller Shaft - Refer to Propeller Replacement for removal and installation of the propeller.
Coat the entire propeller shaft with lubricant to prevent the propeller hub from corroding and
seizing to the shaft.
26902
3. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or
Special Lubricant 101.
Tube Ref No. Description Where Used Part No.
34
Special Lubricant 101
Alternator belt tensioner
pivot shaft, swivel bracket,
tilt support lever, tilt tube,
steering cable
92-802865Q02
95
2-4-C with Teflon
Alternator belt tensioner
pivot shaft, swivel bracket,
tilt support lever, tilt tube,
steering cable
92-802859Q1