Mercury 25 2-Stroke - Protecting External Outboard Components; Protecting Internal Engine Components

MAINTENANCE
92 eng
4. Place a block of wood between the gearcase and propeller
to hold the propeller.
27296
5. Remove the cotter pin, propeller nut, and washer.
a - Cotter pin
b - Nut
c - Washer
d - Propeller
e - Propeller thrust holder
f - Propeller shaft
6. Pull propeller straight off the propeller shaft. If the propeller
is seized to the propeller shaft and cannot be removed, have
the propeller removed by an authorized dealer.
37520
a
b
c
d
e
f