MAINTENANCE
88 eng
Before servicing any part of the fuel system, stop the engine and
disconnect the battery. Drain the fuel system completely. Use an
approved container to collect and store fuel. Wipe up any
spillage immediately. Material used to contain spillage must be
disposed of in an approved receptacle. Any fuel system service
must be performed in a well‑ventilated area. Inspect any
completed service work for sign of fuel leakage.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling,
leaks, hardness, or other signs of deterioration or damage. If any
of these conditions are found, the fuel line or primer bulb must be
replaced.
ENGINE FUEL FILTER
Inspect the sight bowl for water accumulation and inspect the
filter element for sediment. Clean the tank and filters as follows.
CLEANING FUEL TANK
1. Water or dirt in the fuel tank may cause engine trouble.
2. Clean the tank at specified times or after long storage period
(over three months).
Fuel filters are provided inside the fuel tank and at the engine.
1. Unscrew four screws, remove the housing, then clean the
fuel filter.
a - Filter: Unscrew the fuel pickup elbow and then clean it
b - Fuel pickup elbow
To Next Page
Loading...
