OPERATION
80 eng
5. Turn the key to the off position, or pull the lanyard stop
switch.
a - Hook
b - Off
c - On
d - Lanyard stop
switch
IMPORTANT: Follow the instructions below.
•
After the engine stops, tighten the air vent screw on the
tank cap.
•
Disconnect the fuel connector from the engine.
•
For electric start models, disconnect the cables from
the battery when not in use for extended periods.
Emergency Starting
If the starter system fails, use the spare starter rope (provided)
and follow procedure.
1. Ensure the lanyard stop switch is in run position.
2. Remove the starter rope.
3. Wind a pull rope around the flywheel.
To Next Page
Loading...
